Common Scents for the Season

The crisp, fresh smell of morning air after an overnight snowfall that has blanketed the world in white. The savory sage aroma of a turkey roasting. The sweet, spicy scent of a pumpkin pie baking in the oven or hot mulled cider simmering on the stove.

It is not just the sights and sounds of the season, but the familiar aromas associated with holiday celebrations that evoke warm memories of Christmases past and set the stage for a wonderful Christmas present. Is there anything more Christmasy than the smell of fresh baked gingerbread cookies? (Okay, maybe the aroma of pine trees...)

If you love the seasonal scent of sugar and spice, you'll love these decorative cinnamon-scented pine cone projects!

Pine Cone Ornaments
Skill Level 1: No experience necessary
Crafting Time: 45 minutes

Supplies & Tools

• 1 pkg scented pine cones
• 1 pkg holiday picks with pine & berries
• 1 bolt 1/2"-wide ribbon
• Scissors
• Wire cutters
• Glue gun and glue sticks

Directions

Refer to photo (or view pdf available on Joann.com).

1. Select pine cones with open areas between each row.
2. Cut an 8" length of ribbon. Form a loop and glue ends together to create the hanger. Center and glue to top of the pine cone.
3. Cut fifteen 5" lengths of ribbon. Glue cut ends together. evenly space and glue 5 or 6 loops for the first row at the top of the pine cone. Repeat 2 more times, alternating loops between each row.
4. Cut the pine picks into 1-1/2" pieces. Glue each piece evenly spaced on pine cone to fill out the top.
5. Cut the berries into smaller pieces and glue to pine cone to fill.

Pine Cone Place Cards
Skill Level 1: No experience necessary
Crafting Time: 1 - 3 hours

Supplies & Tools

• 1 Krylon® silver leafing pen
• 1 small block of floral foam
• 1 pkg Perfect Pearls, silver
• Low melt glue gun and glue sticks
• Red or green cardstock
• 1 large pine cone
• Small pine sprig
• 3 Small berry picks
• 1 mini tin container
• Small paintbrush
• Small paper punch
• Sharp knife
• Scissors
• Wire cutters
• Floss

Directions

1. Tightly fill silver bucket with foam.
2. Glue pine cone to center of foam.
3. Refer to photo (or project pdf available on Joann.com) often when placing all materials.
4. Using a small paintbrush, apply silver Perfect Pearls to all pine cone petals. Reapply if more color is desired.
5. Cut three berry picks into individual pieces. Fill around the bottom of pine cone, glue and push into foam along the edge of bucket.
6. Cut mini pieces of pine sprig and glue in place among the berries.
7. Cut place card out of cardstock. Punch hole in the end with small paper punch. Write name with Silver Leafing Pen. Attach to handle of bucket with floss.

Pine Cone Favor Bag
Skill Level 1: No experience necessary
Crafting Time: 1 - 3 hours

Supplies & Tools

• 1 pkg 9" Ivory bridal tulle
• 1 spool Printed ribbon, 7/8" wide
• 1 bag cinnamon scented pine cones
• 1 pkg Mini pine cones
• 1 pkg Floral wire
• Low melt glue gun and glue sticks
• Thread to match tulle
• Sewing machine
• Scissors
• Wire cutters
• Ruler

Directions

1. Cut a 50" length of tulle. Fold in half lengthwise, then in half again to approximately 9" x 12".
2. Pin together.
3. To create the bag, sew 1/2" seam allowance, starting at the folded edge on both sides. Trim seam allowances close to seam lines.
4. Refer to photo (or project pdf available on Joann.com) in placing all materials.
5. Fill bag with three to four cinnamon-scented pine cones.
6. Cut a 7" length of ribbon and tie tightly around top of bag.
7. Use a length of ribbon to make a 4-loop bow and wire to the top of bag. Trim ribbon ends at an angle.
8. Trim excess tulle from the top of bag.
9. Glue two mini pine cones to the bow.

Pine Cone Garland
Skill Level 1: No experience necessary
Crafting Time: 1 - 3 hours

Supplies & Tools

• 2 bags cinnamon scented pine cones*
• 3 strands Red glass beads*
• 2 spools Swiss dot red ribbon, 3/8" wide
• 1 spool Floral wire
• Brown floral tape
• Scissors
• Wire cutters
• Tape measure
  *Bags of pine cones and strands of beads create a 5" garland. More may be necessary for longer garland.

Directions

1. Cut long length of wire. Additional length can be added at any time.
2. Make a 4" loop on one end of wire. String four beads onto wire and push to loop end.
3. Add pine cone next to beads, wrap the wire around the widest portion of the pine cone twisting tightly to hold.
4. String three beads on and push next to Pine cone.
5. Repeat steps 3 and 4 until reaching desired length.
6. End with four beads. Twist wire to form the end loop.
7. Use ribbon to create large loops for easy hanging, or a bow. Attach to end loop with wire.

When you're done making your holiday decorations, be sure to share pictures of your creations in our Jo-Ann Fan Gallery on Facebook.

For more ideas on handmade ways to make your Christmas merry, visit Joann.com/projects.

Resources

• Project: Pine Cone Ornaments
• Project: Pine Cone Place Cards
• Project: Pine Cone Favor Bag
• Project: Pine Cone Garland
• Get Inspired with Projects on Joann.com
• Product: Cinnamon Scented Ponderosa Pinecones
• Product: Panacea 8" Heavy Duty Wire Cutter
• Product: Surebonder Mini Glue Gun Kit
• Find Us: Jo-Ann Store & Class Locator
• Shop: Jo-Ann Fabric & Craft Stores Online
• Like Us: Jo-Ann on Facebook